76-00-00
page 44
May 01/2007
Effectivity 914 Series
Edition 1 / Rev. 0
d02626
BRP-Rotax
Maintenance Manual
3.1.2.6) Pressure sensors
See Fig. 76-43.
To prevent mixup of the two pressure sensor inputs, the plug
connections are in different colors. In addition, the airbox
pressure sensor cable set of the wiring harness is labeled.
Gray plug connection (1) - ambient pressure sensor
Black plug connection (2) - airbox pressure sensor
If a pressure sensor must be replaced, it is necessary to check
the current values via communication program (Monitoring).
See 76-00-00 sec. 3.1.
If this aid is not at your disposal, an engine test run has to be
performed. See corresponding Maintenance Manual (Line
Maintenance) for the respective engine type 914 Series.
â–² WARNING: If an inspection reveals irregularities, then the
engine must not be taken in operation until the
cause is found and rectified.
To Next Page
General
