Anynet+ (HDMI-CEC)
This SMART TV is enabled with Anynet+ (HDMI-CEC), a feature that makes it possible to control
Samsung external devices connected to the TV with ease. With Anynet+ (HDMI-CEC), you can use the
TV remote control to operate all compatible Samsung devices that are connected to the TV. However,
Anynet+ (HDMI-CEC) only works with the remote control and not with the panel keys.
Precautions
●
This feature does not support other manufacturer's products.
●
Anynet+ devices must be connected to the TV using an HDMI cable. Some HDMI cables may not
support Anynet+ (HDMI-CEC). In this case, you will need to replace the HDMI cable.
●
The TV remote control may not function under certain circumstances. In this case, select the
Anynet+ device again.
●
Anynet+ (HDMI-CEC) only works with external devices that support Anynet+ (HDMI-CEC) and
only when those devices are either in standby mode or turned on.
●
Anynet+ (HDMI-CEC) can control up to 12 compatible external devices (up to 3 of the same type).
With home theatre systems, however, the number of systems that can be controlled is limited to
one.
●
A home theatre system that has been connected to the TV using an HDMI cable and an optical
cable supports 2-channel audio only. However, the home theatre is capable of supporting
5.1-channel audio from digital broadcasts.
●
To listen to 5.1-channel audio from an external device, connect the device to the TV via an HDMI
cable and the device's digital audio output connector directly to the home theatre system.
To Next Page
Loading...
Need help?
General