Video Codecs
Other Restrictions
Codecs may not function properly if there is a problem with the content data.
Video content does not play or does not play correctly if there is an error in the content or container.
Sound or video may not work if they have standard bit rates/frame rates above the TV’s compatibility
ratings.
If the Index Table is wrong, the Seek (Jump) function does not work.
When playing video over a network connection, the video may not play smoothly because of data
transmission speeds.
Some USB/digital camera devices may not be compatible with the player.
Video Decoders
●
Supports up to H.264, Level 4.1 (does not support FMO/ASO/RS)
●
VC1 AP L4 is not supported.
●
All video codecs excluding WMV v7, v8, MSMPEG4 v3, MVC, and VP6:
Below 1280x720: 60 frame max
Above 1280x720: 30 frame max
●
GMC is not supported.
●
Supports SVAF top/bottom and left/right only.
●
Supports Blu-ray/DVD MVC specs only.
Audio Decoders
●
WMA 10 Pro supports up to 5.1 channels. Supports up to M2 profile. (Excluding M0 LBR mode)
●
WMA lossless audio is not supported.
●
Vorbis is supported for up to 2 channels.
●
DD+ is supported for up to 5.1 channels.
To Next Page
Loading...
Need help?
General