Motion Control Environment Test
Screen Menu
>
Smart Features
>
Motion Control
>
Motion Control Environment Test
Run this test before using Motion Control to ensure proper functionality.
1.
Run Motion Control Environment Test and select Start within 1.5m and 4m of the TV. If light
reflects on the TV screen, user can be difficult to use Motion Control.
2.
Adjust the camera angle so that you appear inside the square displayed on the screen. Once
you have finished adjusting the camera angle, wave one hand slowly from left to right. Spread
your hand out with the palm facing the TV. An arrow cursor appears on the screen when the TV
recognises the action. If recognition fails, try again.
Motion Control Tutorial
Screen Menu > Smart Features > Motion Control > Motion Control Tutorial
A fun and easy way to learn about Motion Control. Launch Motion Control and follow the guide's
instructions.
Motion Control Activation
Screen Menu
>
Smart Features
>
Motion Control
>
Motion Control
Try Now
Raise your hand with the palm facing the TV. Hold it for a moment and slowly wave your hand from
side to side three or four times. When your hand is successfully recognised, the Motion Control is
activated and a pointer is displayed on the screen.
"
Dropping your hand out of the range of the TV camera deactivates Motion Control. Raise your hand within 3
seconds to reactivate it.
To Next Page
Loading...
Need help?
General