Common Interface
Screen Menu > Broadcasting > Common Interface
Try Now
●
CI Menu
This enables the user to select from the CAM-provided menu. Select the CI Menu based on the
menu PC Card.
●
CAM video transcoding
You can configure the setting to transcode the video codec from the CAM automatically. Turn it
Off if you do not want to use it.
"
You must use a CAM that supports transcoding the video codec.
●
Application Info
View information on the CAM inserted into the CI slot and on the “CI or CI+ CARD” which is
inserted into the CAM. You can install the CAM anytime whether the TV is on or off.
1.
Purchase a CI CAM module at your nearest dealer or by phone.
2.
Firmly insert the “CI or CI+ CARD” into the CAM in the direction of the arrow.
3.
Insert the CAM with the “CI or CI+ CARD” into the common interface slot, in the direction of the
arrow so that it aligns parallel with the slot.
4.
Check if you can see a picture on a scrambled signal channel.
●
CICAM PIN Manager
Manage of CICAM (Common Interface Common Access Module) PIN. You can save PIN or change
stored PIN, and set other options about PIN.
To Next Page
Loading...
Need help?
General