TV Viewing
Broadcasting
Auto Tuning
Aerial Air
Channel List
Guide
Schedule Manager
Edit Channel
Edit Favourites
"
The displayed image may differ depending on the model.
Use this feature to view the programme guide and programme information more easily. However, these
features are not available when viewing TV using a cable box or satellite receiver.
Programme Info
Select the Virtual Remote panel's or press the regular remote's INFO button while watching TV to view
information about the current programme.
However, Programme Info is only available with digital channels. In order to use the Programme Info,
you must first set the TV's clock. To set the clock, navigate to Time (Screen Menu
>
System > Time
> Clock). The Programme Info may vary depending on the type of incoming signal and may not be
available at all for certain programmes.
Tap on the touchpad while the programme information screen is shown to start recording the current
programme. In addition, drag left/right on the touchpad to check out other programmes or tap on the
touchpad to set up a Timer Viewing or Timer Recording setting for the selected programme.
"
Press and hold the
{
button while watching TV to view information about the current programme.
Change the Broadcast Signal
Screen Menu > Broadcasting > Aerial
Try Now
Choose an aerial to receive digital broadcast signals from.
Guide
Screen Menu > Broadcasting > Guide
Try Now
View each digital channel's programming schedule, including showtimes. Check the programming
schedules and even setup a Schedule Viewing or Schedule Recording. Press GUIDE to launch the
guide.
Change Channels
Select a channel from Guide to jump to that channel right away.
To Next Page
Loading...
Need help?
General