29
Connection Using an DP Cable
DP IN
DISPLAY OUT
• Precautions for using DP
―
Some graphics cards that are not compliant with the DP standard may prevent the
Windows Booting/Bios screen from being displayed when the product is in power-saving
mode. If this is the case, make sure to turn on the product first before turning on your PC.
―
The interface DP IN on the product and the provided DP cable are designed based on the
VESA standards. Using a DP cable that is not VESA compliant may cause the product to
function improperly. Samsung Electronics shall not be held responsible for any issues
from using a cable that is not VESA compliant.
Make sure to use a DP cable that is VESA compliant.
―
To use the optimal resolution (3840x2160 @ 60Hz) when the input source is DisplayPort,
using a DP cable shorter than 5m is recommended.
―
Disabling power-saving mode when the input source is DisplayPort may import new
resolution information and reset the task window size or location.
To Next Page
Loading...
Need help?
General
