67
Equaliser
m MENU → Sound → Equaliser → E
Adjust the equaliser to customise the volume and pitch, and enhance the richness of the sound
output.
• 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of
specific bandwidth frequencies.
• Reset: Resets the equaliser to its default settings.
―
Available only when Sound Mode is set to Standard.
Auto Volume
m MENU → Sound → Auto Volume → E
The volume can vary depending on the channel.
Automatically equalise the volume level when switching to another channel.
• Off / Normal / Night
Normal equalises the volume level on each channel, so that when you change channels, the
volume level is the same.
Night equalises and decrease the volume level on each channel, so each channel is quieter.
Night is useful at night, when you may want to keep the volume low.
―
To use the volume control of a connected source device, set Auto Volume to Off. A change to
the volume control of the connected source device may not be applied if Auto Volume is set
to Normal or Night.
Reset Sound
m MENU → Sound → Reset Sound → E
Reset all sound settings to the factory defaults.
To Next Page
Loading...
Need help?
General
