Siemens OpenStage 40 T User Manual

Step by Step
Enhanced phone functions
56
Using the shift key
The sensor key "Split" Æ page 17 (must be configured
by the relevant service personnel) can be used for the
following functions:
• Consultation (return to waiting call or waiting confer-
ence)
• Toggle/Connect
• Acceptance of a second call
• Acceptance of a group call
Second call
Z You hear a call waiting tone. Information for the call is
displayed.
T Press the flashing sensor key "Split". You pick up the
waiting call. The LED lights up.
Toggle/Connect
[ You are connected with two parties. One party is on
hold. The sensor key "Split" lights up.
R Press the sensor key "Split" to switch to the other party.
The first party is placed on hold.
Consultation
[ j You call the second party. The second party does not
answer.
S Press the sensor key "Split" to return to the waiting par-
ty or conference.
Group call
[ You are connected with a party. A group call is waiting.
Information for the group call is displayed.
T Press the flashing sensor key "Split". You pick up the
group call, the first party is placed on hold. The LED
lights up.

Siemens OpenStage 40 T Specifications

General

Brand	Siemens
Model	OpenStage 40 T
Category	IP Phone
Language	English