More functions/services
131
Step by Step
Controlling relays
(only for HiPath 3000)
If this function has been configured (contact your ser-
vice personnel), you can use up to four relays to enable/
disable different devices (such as a door opener).
Depending on how you program the relays, you can ac-
tivate and deactivate them manually them or configure
them to activate and deactivate automatically (after tim-
eout).
Select and confirm the option shown,
or
select and confirm the option shown.
1...4 Enter the relay.
Sensors (HiPath 33x0/35x0 only)
If configured (consult your service personnel), sensors
are able to recognize signals, call your phone, and dis-
play an appropriate message on the screen.
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 (system networking via PC net-
work) ! page 131!
Control Relay On
Control Relay Off
To Next Page
Loading...
Need help?
General