Enhanced phone functions
69
Step by Step
Parking a call
You can park up to ten calls, either internal, external, or
both. Parked calls can be displayed on and picked up
from another telephone. This feature is useful if you
want to continue a call at another phone.
Prerequisite: You are conducting a call.
v Open the Program/Service menu ! page 40.
Select and confirm the option shown.
Select and confirm the option shown.
0 ... 9 Enter the number of the park slot (0 - 9) and make a note
of it. If the park slot number you entered is not dis-
played, it is already in use; enter another one.
Retrieving a parked call
Prerequisite: One or more calls have been parked. The
phone is idle.
v Open the Program/Service menu ! page 40.
Select and confirm the option shown.
Select and confirm the option shownSelect and confirm
the option shown
[1]
.
0 ... 9 Enter the park slot number you noted earlier.
If the park slot number you enter is not in use, you can-
not retrieve the call.
Calls g
Park a call
Calls g
Retrieve call
[1] „Differing display view in a HiPath 4000 environment (not for
HiPath 500)” ! Seite 185
If a parked call is not picked up, after a specific pe-
riod of time the call is returned to the telephone
from where it was parked (recall).
To Next Page
Loading...
Need help?
General