Basic functions
49
Step by Step
Dialing with the headset connected
Prerequisite: The headset is connected.
j internal: Enter the station number.
External calls: Enter the external code and the station
number.
o The headset key lights up.
The connection is established as soon as your input is
complete.
Dialing with DDS keys
Prerequisite: You have saved a number on a sensor key
! page 93.
S Press the programmable repdial key.
If the required phone number is on a different level, first
press the programmed sensor key to shift levels "Layer
X".
Ending a call
\ Replace the handset.
s Press the key shown.
or
n Press the key shown.
Rejecting a call
The phone is ringing. The caller is displayed.
Select and confirm the option shown.
The connection is cleared down. The caller receives the
message "Currently not possible".
Make sure your headset port is set up properly
! page 162.
You can press the DDS key during a call and au-
tomatically initiate a callback! page 51.
Reject call
To Next Page
Loading...
Need help?
General