Getting to know your OpenStage phone
14
Getting to know your OpenStage phone
The following sections describe the most frequently used operating ele-
ments and the displays on your OpenStage phone.
The user interface of your
OpenStage 60 T/80 T
The diagram shows an OpenStage 60 T, the description applies to both
product variants.
The only difference between the OpenStage 80 T and
OpenStage 60 T is in their casing.
1 You can make and receive calls as normal using the handset.
2 The large graphic display permits intuitive operation of the phone
! page 25.
3 Using the mode keys you can conveniently use the phone’s applica-
tions. To select a tab within an function press the relevant key repeat-
edly until the required tab is displayed ! page 19.
4 Use the TouchGuide to navigate conveniently through the applica-
tions on your telephone ! page 20.
5 You can customize your telephone by assigning phone numbers and
functions to the programmable sensor keys ! page 22.
6 The function keys allow you to call up the most frequently used func-
tions during a call (e.g. Disconnect) ! page 18.
7 Audio keys are also available, allowing you to optimally configure the
audio features on your telephone ! page 18.
8 The TouchSlider allows you to adjust the current volume (e.g. tele-
phone rings - ringer volume) ! page 18.
9 Incoming calls are visually signaled via the call display.
10 The keypad can be used to enter phone numbers and text ! page 24.
7
10
1
4
6
9
3
8
2
5
To Next Page
Loading...
Need help?
General