Siemens OpenStage 60T User Manual

Call forwarding
79
Step by Step
Call forwarding
You can immediately forward internal or external calls to
different internal or external telephones (destinations).
(An external destination requires special configuration
in the system.)
Select your preferred method:
• „Call forwarding key” ! Seite 80
• „Activating call forwarding via the Program/Service
menu” ! Seite 83
You can program additional call forwarding instructions
via the Program/Service menu, „Using system forward-
ing instructions” ! Seite 85.
Active call forwarding indication
An active call forwarding instruction is indicated on the
display when your phone is idle ! page 28:
r The LED lights up.
The call forwarding icon, the station number and, where
applicable, the name of the forwarding destination are
displayed on the first line below the status bar.
The name of the party is used if stored in the phone-
book.
If call forwarding is activated for internal or external
calls, the number is preceded by the abbreviation "INT"
or "EXT".
When call forwarding is active, a special dial tone
sounds when you lift the handset.
If DID DTMF is active (contact your service per-
sonnel), you can also forward calls to this desti-
nation.
The call forwarding key flashes if you are a call
forwarding destination ! page 18.
220870 Dalai Lama
INT Dalai, Lama

Siemens OpenStage 60T Specifications

General

Brand	Siemens
Model	OpenStage 60T
Category	Telephone
Language	English