Step by Step
Programming sensor keys
88
The label appears automatically and can be altered
! page 94.
The LED displays ! page 22 and ! page 88 show the
status of the function.
Overview of functions
The functions are split into the following menus:
• Destinations
• Feature Settings
• PIN and Authorization
• Calls
• More features
Saved function LED messages
Call forwarding, Forwarding - trunk, Forward line,
Night answer, Do not disturb, Telephone lock, Advi-
sory message, Ringer cutoff, HF answerback on/off,
Join/leave group, Caller ID suppression, Call
wait.term., Waiting tone off, Ring Transfer, Record-
ing, Door opener on/off, Control Relay (only for
HiPath 3000), Ringing group on, Shift Key, UCD
(Available on/off, Work on/off), Night answer on/off,
MULAP Privacy Release:
S Saved function is not activated.
R Saved function is activated.
Callback:
S You have no entry for callback.
R You have an entry for callback.
The programmed function is activated by briefly
touching the key. For functions that can be
switched on/off such as "Do not disturb", press
once to switch the function on and press again to
switch the function off. When the function is
switched on, the LED lights up.
The available functions depend on your configu-
ration. If a function is missing, contact your ser-
vice personnel.
To Next Page
Loading...
Need help?
General