Siemens RUGGEDCOM RX1510 Installation Guide

Chapter 3
Communication Ports
RUGGEDCOM RX1501
Installation Guide
30 DDS (Digital Data Services) Modules
2
1
Figure 46: W12, W22, W32 Cellular Modem
1. SIM Card Cage 2 2. SIM Card Cage 1
3. Open SIM card cage 1 by sliding the silver catch towards the antenna connectors and flip the cage up.
4. Insert a SIM card in to the cage.
5. Close SIM card cage 1 by flipping the cage down and slide the silver catch away from the antenna
connectors.
6. For W12, W22 and W32 cellular modems, repeat Step 3 to Step 5 install a SIM card in SIM card cage 2.
7. Install the back of the module and secure it to the module chassis with the four screws removed previously.
8. Install the module. For more information, refer to Section 3.9.1, “Installing a Module”.
Section 3.7
DDS (Digital Data Services) Modules
The RX1501 can be equipped with a DDS port line module that supports 56 kbps (Master/Slave) and 64 kbps
(Slave) line rates.
1
2
Figure 47: 1 × DDS with RJ45 Ports (D02)
1. Rx LED 2. Tx LED

Siemens RUGGEDCOM RX1510 Specifications

General

Brand	Siemens
Model	RUGGEDCOM RX1510
Category	Switch
Language	English