Siemens SIMATIC IPC277G User Manual

Maintaining and repairing the device
7.6 Recycling and disposal
SIMATIC IPC277G
Operating Instructions, 08/2021, A5E50059956-AA
69
7. Click Next to continue.
8. Select the radio button next to “Yes, I want to restart my computer now.” and click OK
to restart the computer for the changes to take effect.
Step 6: install the Serial I/O driver
1. Click Step7: Intel® Serial I/O Driver.
2. Click
to install the Serial I/O driver.
3. Click Yes to confirm and require the restart computer before setup to continue installation.
4. Click Yes to continue.
5. Click Finish.
The installation is completed.
Step 7: install the Graphics Command Center
1. Click Step7: Intel® Graphics Command Center.
2. Click
to install the Intel® Graphics Command Center.
3. Click Yes to confirm the user account control question.
4. Click Yes to continue.
5. Click Finish.
The installation is completed.
Step 8: install the Panel Drivers and Tools software
1. Click Step8: Panel Drivers and Tools software.
2. Click
to install the software.
3. Click Yes to confirm the user account control question.
4. Click Yes to continue.
5. Click Finish.
The installation is completed.
7.6 Recycling and disposal
Due to their low level of pollutants, the devices described in these operating instructions can
be recycled. Contact a certified disposal service company for environmentally sound recycling
and disposal of your old devices.

Siemens SIMATIC IPC277G Specifications

General

Brand	Siemens
Model	SIMATIC IPC277G
Category	Industrial PC
Language	English