Technical specifications
8.5 Hardware description
SIMATIC IPC847D
Operating Instructions, 01/2014, A5E32997454-AA
163
If you want to use "IRQ 3" for a slot, you must disable "Internal COM 2" via Advanced >
Peripheral Configuration. IRQ 3 is then automatically assigned to the slot with the lowest slot
number.
IRQ assignment for Windows (APIC mode)
1, 2
1
1
1
1
1, 3
Requirement: The modules in the PCI slots each require only one interrupt
Requirement: VGA and PCIexpress do not require an interrupt
3)
Requirement: VGA does not require an interrupt and Ethernet1 is disabled
Currently allocated system resources
All system resources (hardware addresses, memory configuration, allocation of interrupts,
DMA channels) are assigned dynamically by the Windows OS, depending on the hardware
configuration, drivers and connected external devices. You can view the current
configuration of system resources or possible conflicts with the following operating systems:
Start > Enter "msinfo32" in the search function
To Next Page
Loading...
Need help?
General
