Siemens SIMATIC IPC847D User Manual

Technical specifications
8.6 BIOS description
SIMATIC IPC847D
176 Operating Instructions, 01/2014, A5E32997454-AA
The following table shows the standard menus. Not all menus are included in each supplied
device configuration.
Menu
Meaning
Main
Display system information, for example, BIOS version, processor and memory
Advanced
Configure hardware using different submenus
Security
Security functions, e.g., setting a password
Power
Specify CPU settings and switch-on functions.
Boot
Determine boot options, e.g., boot sequence
Exit
Save and exit (see Exit menu)
8.6.4
Exit menu
You always exit BIOS Setup in this menu.
Exit Saving Changes
All changes are saved and the system is restarted with the new Setup parameters.
Save Change Without Exit
All changes are saved.
Exit Discarding Changes
All changes are discarded and the system is restarted with the old Setup parameters.
Load Optimal Defaults All setup parameters are reset to the safe default values.
Notice: The existing Setup parameters are overwritten by this.
Load Custom Defaults The profile must be loaded with the custom Setup parameters.
Requirement: The parameters are saved prior to this with "Save Custom Defaults".
Save Custom Defaults The currently configured Setup parameters are saved as a custom profile (see also "Load
Custom Defaults").
Discard Changes
All changes are discarded.

Siemens SIMATIC IPC847D Specifications

General

Brand	Siemens
Model	SIMATIC IPC847D
Category	Industrial PC
Language	English