Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual

Configuring with Web Based Management
4.4 "System" menu
SCALANCE SC-600 Web Based Management (WBM)
118 Configuration Manual, 10/2021, C79000-G8976-C475-03
• Received bytes
Shows how many bytes were received.
• Sent bytes
Shows how many bytes were sent.
• Connected since
Shows how long a connection has been present.
4.4 "System" menu
4.4.1 Configuration
System configuration
The WBM page contains the configuration overview of the access options of the device.
Specify the services that access the device. With some services, there are further
configuration pages on which more detailed settings can be made.
The standard port can also be changed for some services.
Note
Changing the standard port
Some programs can only access the service over the standard port, e.g. TIA Portal
accesses HTTPS over standard port 443. Before you change the port, check which port
the program uses. When you change the standard port, you must access the service over
the changed port.
Firewall
The firewall is reinitialized after the ports are changed. This means that the changed
ports are applied in the firewall rules. Existing connections, for e
xample, via the dynamic
firewall, can be used with restrictions during this time.

Siemens SIMATIC NET SCALANCE SC-600 Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE SC-600
Category	Switch
Language	English