Siemens SIMATIC NET SCALANCE SC-600 Configuration Manual

Configuring with Web Based Management
4.4 "System" menu
SCALANCE SC-600 Web Based Management (WBM)
130 Configuration Manual, 10/2021, C79000-G8976-C475-03
4.4.3.4 DNS Records
You configure a DNS address directory on this WBM page. To do this, enter the IPv4
address associated with an FQDN.
The device checks if there is an entry for DNS requests and converts the URL into the
corresponding IPv4 address.
Description
The page contains the following boxes:
• Enable DNS Records
When this is enabled, the address directory is used.
The table has the following columns:
• Select
Select the check box in the row to be deleted.
• Domain
Enter the FQDN (Fully Qualified Domain Name).
• IP Address
Enter the corresponding IPv4 address.
• Comment
If needed, enter a comment.

Siemens SIMATIC NET SCALANCE SC-600 Specifications

General

Brand	Siemens
Model	SIMATIC NET SCALANCE SC-600
Category	Switch
Language	English