Description of system components
8.3 Operator panel with display
SIMOCODE pro
System Manual, 05/2019, A5E40507475002A/RS-AD/004
123
Digital module 1 is DM-F PROFIsafe
Possible only if digital module 1 is "PROFIsafe", an OPD as from version *E04* and a
SIMOCODE pro V PB / PN basic unit (PB as from product version *E07*) is used.
● Inputs DM-F PROFIsafe: Inputs 1, 2, 3, "Feedback circuit".
● Outputs DM-F PROFIsafe: Outputs 1, 2, "Enabling circuit."
Ground-fault module
Possible only if the ground-fault module is used.
● Ground-fault current [mA]
● Inputs
- Open circuit
- Short-circuit.
Analog module
Possible only if the analog module is used.
● Input 1, input 2
● Output
● Open circuit
Temperature module
Possible only if the temperature module is used.
● Max. temperature
● T1, T2, T3
● Sensor type Pt100, Pt1000, NTC, KTY83, KTY85
● Sensor fault sensor out of range
To Next Page
Loading...
Need help?
General
