Description of system components
8.15 Configuration notes for use of a SIMOCODE pro V MR and SIMOCODE pro V EIP basic unit
SIMOCODE pro
158 System Manual, 05/2019, A5E40507475002A/RS-AD/004
8.15 Configuration notes for use of a SIMOCODE pro V MR and
SIMOCODE pro V EIP basic unit
The following expansion modules are not supported:
● DM-F PROFIsafe fail-safe digital module (3UF7330-..)
● Ground-fault module (3UF7500-..).
You will find usage restrictions concerning the operator panel with display in Chapter
Description of the operator panel with display (Page 88).
To Next Page
Loading...
Need help?
General
