Siemens SIMOCODE pro C User Manual

Introduction
1.10 Device series
SIMOCODE pro
24 System Manual, 05/2019, A5E40507475002A/RS-AD/004
1.10 Device series
The following functionally graduated device series are available for SIMOCODE pro:
● Basic units:
SIMOCODE pro C - the compact system for PROFIBUS DP communication with a
direct-on-line and reversing starter function and/or for controlling a circuit breaker
(MCCB).
● General Performance units:
– SIMOCODE pro S - the smart system for PROFIBUS DP with direct-on-line, reversing,
and star-delta starter function or for controlling a circuit breaker or soft starter. Its
expandability with a multifunction module ensures there are always plenty of inputs
and outputs. It enables precise ground-fault monitoring via the 3UL23 residual current
transformer and temperature measurement.
– SIMOCODE pro V PN GP - the smart system for PROFINET with direct-on-line,
reversing, and star-delta starter function or for controlling a circuit breaker or soft
starter. Its expandability with an expansion module ensures there are always plenty of
inputs and outputs, precise ground-fault monitoring via the 3UL23 residual current
transformer and temperature measurement.
● High Performance units:
SIMOCODE pro V – the variable system that offers numerous functions, such as voltage
measurement and fail-safe shutdown, in addition to all the SIMOCODE pro C/pro S
functions. Devices are available for the following communication protocols:
– PROFIBUS DP
– Modbus RTU
– PROFINET
– EtherNet/IP.
See Check list for selecting a device series (Page 61).

Siemens SIMOCODE pro C Specifications

General

Brand	Siemens
Model	SIMOCODE pro C
Category	Control Unit
Language	English