To Next Page

To Previous Page

Introduction

1.11 Modules, interfaces, configuration options

SIMOCODE pro

System Manual, 05/2019, A5E40507475002A/RS-AD/004

Additional control programs (star-delta starters, Dahlander starters, pole-changing starters,

soft starters, each program also possible in combination with reversing starter, solenoid

valve and positioner) are integrated in SIMOCODE pro V High Performance units. The

SIMOCODE pro V device type is also particularly versatile. Its functionality can be expanded,

if required, for example:

● The number and type of binary inputs and outputs can be increased in stages and

adapted.

● A current/voltage measuring module can be used for additional voltage measurement and

for monitoring power-related measured values (power management).

● A temperature module enables the evaluation of several analog temperature sensors.

● A ground-fault detection system can be integrated together with a summation current

transformer.

● An analog module extends the system by additional analog inputs and outputs, for

example, for fill-level or flow-rate monitoring.

● An operator panel with display (OPD) is available as an alternative to the standard

operator panel (OP)

(restriction in the case of the SIMOCODE pro V PB: from version *E03*).

A special current/voltage measuring module for dry-running protection of centrifugal pumps

in hazardous areas by active power monitoring can be used in combination with the following

high performance devices with PTB 18 ATEX 5003:

● SIMOCODE pro V PB from version *E16*

● SIMOCODE pro V PN from version *E13*

● SIMOCODE pro V EIP from version *E04*

SIMOCODE pro C and SIMOCODE pro S are upwardly-compatible with SIMOCODE pro V.

This means you can combine different series in your plant according to functional

requirements.

Depending on functional requirements, the systems can be used simultaneously in a

low-voltage switchboard without any problems and without any additional effort.

Parameterization of SIMOCODE pro C or SIMOCODE pro S can be transferred without a

problem.

Siemens SIMOCODE pro C User Manual

Questions and Answers: