Siemens SOMATOM Scope User Manual


Country-specific regulations must be observed.
Restarting after power failure
If the power failure occurs, you can restart your system after power
recovery.
✓
A power failure has occurred.
1 Switch the power switch off.
2 Wait for approximately 1 minute after power recovery.
3 Switch the system on again.
Retracting the table top in emergency
In an emergency or power failure, you can position the table top
manually. You can use the handle at the end of the table to move
the table top out of the gantry.
2.2
2.3
2 In case of emergency
20 Quick Guide
Print No. HC-C2-015-G.626.08.01.02

Siemens SOMATOM Scope Specifications

General

Brand	Siemens
Model	SOMATOM Scope
Category	Medical Equipment
Language	English