›
If the hands-free system announces (as standard SKODA_BT) on the display
of the mobile phone, enter the PIN
1)
within 30 seconds and wait, until the
connection is established
2)
.
›
To finish pairing in the MAXI DOT display, confirm the creation of the new
user profile.
If there is no free space available to create a new user profile, delete an exist-
ing user profile.
During the connecting procedure, no other mobile phone may be connected
with the hands-free system.
Up to four mobile phones can be paired with the hands-free system, whereby
only one mobile phone can communicate with the hands-free system.
The visibility of the hands-free system is automatically switched off 3 minutes
after the ignition is switched on and is also deactivated when the mobile
phone has connected to the hands-free system.
Restoring the visibility of the hands-free system
If you have not managed to connect your mobile phone with the hands-free
system within 3 minutes of switching on the ignition, the visibility of the
hands-free system can be re-established for 3 minutes in one of the following
ways.
›
By turning the ignition off and on.
›
By turning voice control off and on.
›
In the MAXI DOT display under menu item Bluetooth - Visibility.
Creating a connection with an already paired mobile phone
After switching on the ignition, the connection is automatically established for
the already paired mobile phone
2)
. Check on your mobile phone if the automatic
connection has been established.
Disconnecting the connection
The connection to a connected mobile phone can be ended in the following
ways.
›
By withdrawing the ignition key.
›
By disconnecting the hands-free system in the mobile phone.
›
By disconnecting from the user in the MAXI DOT display under the menu item
Bluetooth - User.
Solving connection problems
If the hands-free system reports No paired phone found, check the operating
status of the mobile phone.
›
Is the mobile phone switched on?
›
Is the PIN code entered?
›
Is Bluetooth
®
active?
›
Is the visibility of the mobile phone active?
›
Has the mobile phone already been paired with the hands-free system?
Telephone operation in the MAXI DOT display
Read and observe on page 94 first.
The following menu items can be selected from the Phone menu.
›
Phone book
›
Dial number
3)
›
Call register
›
Voice mailbox
›
Bluetooth
3)
›
Settings
4)
›
Back
Phone book
The Phone book menu item lists the contacts downloaded from the telephone
memory and the mobile phone SIM card.
1)
Depending on the Bluetooth
®
version on the mobile phone, an automatically generated 6-digit PIN (SSP)
is either displayed, or the PIN 1234 has to be entered manually.
2)
Some mobile phones have a menu, in which the authorisation for establishing a Bluetooth
®
connection
is completed by inputting a PIN number. If the authorisation input is required, it must always be per-
formed when re-establishing the Bluetooth connection.
3)
On vehicles fitted with the Amundsen+ navigation system, this function can be accessed via the naviga-
tion system menu; refer to the » operating instructions for the Amundsen+ navigation system.
4)
This function is not available in vehicles fitted with the Amundsen+ navigation system.
97
Communication and multimedia
To Next Page
Loading...
Need help?
General
