Button / adjust-
ment
wheel » Fig. 95
Action Operation
1
Turn downwards Decrease volume
2
Press briefly
Accept a call/end a call
Display of the basic Phone menu →
a)
Main Phone menu → List of dialled numbers → Call selected contact
2
Press and hold button Reject the incoming call
3
Turn up/down Previous / next menu item
3
Press briefly Confirm selected menu item
3
Press and hold button Continuously display first letter of the phone book
3
Quickly turn upwards To the previous initial letter in the telephone book
3
Quickly turn downwards To the next initial letter in the telephone book
4
Press briefly Return to a previous level in the menu
4
Press and hold button Exit telephone menu
a)
The symbol The → symbol means briefly press button again.
Symbols in the display
Read and observe on page 94 first.
The following symbols are displayed in the Maxi DOT display.
Symbol Meaning
Charge status of the telephone battery
a)
Signal strength
a)
A phone is connected to the hands-free system.
The hands-free system is visible to other devices.
A multimedia unit is connected to the hands-free system.
a)
This function is only supported by some mobile phones.
Connecting the mobile phone to the hands-free system
Read and observe on page 94 first.
To connect a mobile phone with the hands-free system, the two devices must
be paired. Detailed information on this is provided in the operating instructions
for your mobile phone.
The following steps must be carried out for pairing
1)
.
›
Activate Bluetooth
®
and the visibility of your mobile phone on your tele-
phone.
›
Switch on the ignition.
›
Select the Phone - New user menu in the MAXI DOT display and wait until
the hands-free system has completed the search.
›
Select the phone you wish to connect from the list of units found.
›
Confirm the PIN
2)
.
1)
On vehicles fitted with the Amundsen+ navigation system, this function can be accessed via the naviga-
tion system menu; refer to the » operating instructions for the Amundsen+ navigation system.
2)
Depending on the Bluetooth
®
version on the mobile phone, an automatically generated 6-digit PIN (SSP)
is either displayed, or the PIN 1234 has to be entered manually.
96
Using the system
To Next Page
Loading...
Need help?
General
