Entering a phone number
The telephone number can be entered as a continuous sequence of numbers
spoken one after the other (the whole number at once) or in the form of digit
blocks (separated by short pauses). After each string of digits (separated by a
brief pause in speaking), all of the digits detected up to now are repeated by
the system.
The digits 0-9 and symbols
+, , # are permitted. The system does not recog-
nize any combination of connected numbers, e.g. "twenty-three".
Switching on voice control
Briefly press the button
1
» Fig. 96 on the multifunction steering wheel.
Switching off voice control
If the system is currently playing a message, the message that is currently be-
ing played must be terminated by briefly pressing button
1
» Fig. 96 on the
multifunction steering wheel.
If the system is expecting a voice command, you can end the dialogue yourself
as follows.
›
With the CANCEL voice command.
›
Briefly press the button
1
» Fig. 96 on the multifunction steering wheel.
Note
■
The dialogue is immediately terminated in the event of an incoming call.
■
The voice control is only possible in vehicles fitted with a multifunction
steering wheel with telephone control.
Voice commands
Basic voice commands
Voice command Action
HELP
After this command the system repeats all possible
commands.
CALL XYZ
This command calls up the contact from the phone
book.
PHONE BOOK
After this command, for example, the phone book
can be repeated back to you, a voice entry for the
contact can be updated or deleted, etc.
CALL REGISTER Lists of dialled numbers, missed calls, etc.
Voice command Action
DIAL NUMBER
After this command, a telephone number can be
entered to establish a connection with the reques-
ted party.
REDIAL
After this command the system calls the last dial-
led number.
MUSIC
a)
Play music from the mobile phone or another
paired device.
FURTHER OPTIONS
After this command the system offers additional
context-dependent commands.
SETTINGS Selection for setting Bluetooth
®
, dialogue etc.
CANCEL The dialogue is ended.
a)
On vehicles fitted with the Amundsen+ navigation system, this function can be accessed via the naviga-
tion system menu; refer to the » operating instructions for the Amundsen+ navigation system.
If a voice command is not detected, the system answers with “Pardon?”, and a
new entry can be made. After the second error, the system repeats the help.
After the third error the answer “Cancelled.” is given and the dialogue is
ended.
Store voice recording of a contact
If automatic name recognition does not work reliably for some contacts, you
can choose to save your own voice tag for the contact in the Phone book -
Voice tag - Record menu item.
Your own voice entry can also be saved using the voice control in the menu
FURTHER OPTIONS.
Multimedia
Introduction
This chapter contains information on the following subjects:
Music playback via Bluetooth
®
100
Operating the radio and navigation system on the multifunction steering
wheel 100
AUX and MDI inputs (AUX and USB) 101
99
Communication and multimedia
To Next Page
Loading...
Need help?
General
