SMC Networks 6724AL2 User Manual

I NTERFACE C OMMANDS
3-85
interface
Use this command to configure an interface type and enter interface
configuration mode. Use the no form to remove a trunk.
Syntax
interface interface
no interface port-channel channel-id
interface
• ethernet unit/port
- unit - This is device 1.
- port - Port number.
• port-channel channel-id (Range: 1-6)
• vlan vlan-id (Range: 1-4094)
negotiation Enables autonegotiation of a given interface IC 3-89
capabilities Advertises the capabilities of a given interface for
use in autonegotiation
IC 3-90
flowcontrol Enables flow control on a given interface IC 3-91
clear counters Clears the statistics on a given interface PE 3-93
shutdown Disables an interface IC 3-94
switchport
broadcast
octet-rate
Configures broadcast storm control IC 3-94
show
interfaces
status
Displays status for the specified interface NE,
PE
3-95
show
interfaces
counters
Displays statistics for the specified interfaces NE,
PE
3-97
show
interfaces
switchport
Displays the administrative and operational status
of an interface
NE,
PE
3-98
Command Function Mode Page

SMC Networks 6724AL2 Specifications

General

Brand	SMC Networks
Model	6724AL2
Category	Switch
Language	English