SMC Networks 6724AL2 - Configuring Port Authorization Mode

C ONFIGURING 802.1 X P ORT A UTHENTICATION
2-53
Web - Click Security, 802.1X, Configuration. Enable dot1x globally for the
switch, modify any of the parameters as required, and then click Apply.
.
CLI – This example enables re-authentication and sets all of the global
parameters for dot1x.
Configuring Port Authorization Mode
When dot1x is enabled, you need to specify the dot1x authentication mode
configured for each port.
Command Attributes
• Status - Indicates if authentication is enabled or disabled on the port.
• Mode – Sets the authentication mode to one of the following options:
- Auto – Requires a dot1x-aware client to be authorized by the
authentication server. Clients that are not dot1x-aware will be denied
access.
- Force-Authorized – Forces the port to grant access to all clients,
either dot1x-aware or otherwise.
- Force-Unauthorized – Forces the port to deny access to all
clients, either dot1x-aware or otherwise.
Console(config)#dot1x max-req 5 3-164
Console(config)#dot1x re-authentication 3-166
Console(config)#dot1x timeout quiet-period 40 3-166
Console(config)#dot1x timeout re-auth 5 3-167
Console(config)#dot1x timeout tx-period 40 3-167
Console(config)#authentication dot1x default radius 3-163
Console(config)#