HEC-OM-O018-A
Chapter 1 Safety Instructions
1.4 Safety Measures
1-6
1.4 Safety Measures
1.4.1 Precautions
This product is designed with consideration for safety. However, misuse
may result in electrical shock or other accidents.
Be sure to keep the following instructions in mind to prevent accidents.
z The product is provided for use in manufacturing industries.
The product herein described is basically provided for peaceful use in
manufacturing industries.
If considering using the product in other industries, consult SMC
beforehand and exchange specifications or a contract if necessary.
If anything is unclear, contact your nearest sales branch.
z Do not disassemble or retrofit this product.
The internal parts of this product cannot be retrofitted by the user.
Contact the sales distributor or branch for all repairs. The user must
not perform any repairs. A product repaired by the user cannot be
guaranteed and carries the danger of causing electrical shock and
z The compatibility of the product is the responsibility of the person
who designs the equipment or decides its specifications.
Since the product specified here is used under various operating conditions,
its compatibility with specific equipment must be decided by the person who
designs the equipment or decides its specifications based on necessary
analysis and test results.
The expected performance and safety assurance of the equipment will be the
responsibility of the person who has determined its compatibility with the
product.
This person should also continuously review all specifications of the product
referring to its latest catalog information, with a view to giving due
consideration to any possibility of equipment failure when configuring the
equipment.
z Be sure that you understand how the chemical fluids use in this
product affect the human body. Follow the MSDS when handling
chemical fluids.
z Read the precautions described in this manual carefully and keep
them strictly.
z Stop operation immediately after any abnormal occurrence.
If an abnormality (noise, odor, smoke, water leakage, etc.) occurs,
stop this product (cutoff the power supply).
Abnormal noise,
odor, smoke or
water leakage
occurs;
1) Cutoff power supply
2) Request repair