SMC Networks INR-244-749 User Manual

HEC-OM-O018-A
Chapter 3 Transporting and Installation
3.2 Installation
3-2
3.2 Installation
3.2.1 Installation Conditions
z
Outdoor
z
Altitude higher than 2000m.
z
Environments containing splashing water, salt water, oil, or various
chemicals (including chemical mists).
z
Environments containing particles and dust.
z
Environments containing corrosive gas, solvents and flammable gas.
z
Envirnoments containing direct sunlight and radiant heat.
z
Environments having ambient temperatures over the following range:
Operation 10 to 35
o
C
Storage 0 to 50
o
C (with no liquid in the bath and facility water
circuit.)
z
Environments having ambient humidity over the following range:
Operation 35 to 80%
Storage 35 to 85%
z Do not use this product in the following environments, where the
product may not work normally and may be damaged.
z Keep enough open space to access main power switch and any
cable connections.
z Keep enough ventilation for liquid vapor.
z This product should be installed on a vibration-free stable level
place.
z The mounting orientation of this product is horizontal.
z Place the product in a flat area which can handle its weight and
take measures to prevent the tipping of the product. If installed
improperly, the product might leak liquid or topple, resulting in
in
j
ur
y
.
z Avoid strong vibrations and impacts
This product is precision equipment and must not be subject to strong
vibration and impact during transport.

SMC Networks INR-244-749 Specifications

General

Brand	SMC Networks
Model	INR-244-749
Category	Laboratory Equipment
Language	English