HEC-OM-O018-A
Chapter 8 Warranty
8.2 Compliance Requirements
8-2
(5) Disclaimer
The following are not covered by this warranty.
① Expenses to compensate for secondary damages to other equipment and goods due to the
failure of the product
② Expenses for repairs performed by other companies
③ Expenses for transfer, installation and removal of the product
④ Expenses for replacement of parts other than those in the product and for the supply of
liquids
⑤ Losses resulting from the inability to use the product (such as telephone charges,
compensation for workplace closings, and commercial losses)
⑥ Expenses and compensation not covered in “(1) Content”.
⑦ Expenses for returning the product
(6) Request for repair
When repair of the product is needed, contact the shop where the product was purchased.
When this is done, the repair will then be performed under warranty by SMC.
No-cost repair of the product is assured within the period and requirements mentioned above.
Failures which occur after the warranty period has passed will, in principle, be charged.
8.2 Compliance Requirements
1. The use of SMC products with production equipment for the manufacture of weapons of
mass destruction(WMD) or any other weapon is strictly prohibited.
2. The exports of SMC products or technology from one country to another are governed by
the relevant security laws and regulation of the countries involved in the transaction. Prior
to the shipment of a SMC product to another country, assure that all local rules governing
that export are known and followed.
To Next Page
Loading...
Need help?
General
