SMC Networks raptor User Manual

Users Guide
89
You must now start up the Raptor-HH VNC server. Press the VNC Server button on the
configuration menu to access the following screen:
If you want to contact SMC for remote support, write the remote address: “eurosmc.es”
or press Default host. If, on the contrary, you wish to contact a PC on your local network
or your own PC, you must enter its IP address.
If you are going to connect with SMC, you must wait until you are
told you can press the Connect button.
If you have decided to connect to a PC of your network, a window will appear on this PC
like the one shown below after pressing Connect:
You will now see an exact copy of your Raptor-HH
screen. You may even press on the keys and execute
certain controls.
Default host.
PC address in
listening mode.
Establish
connection.

SMC Networks raptor Specifications

General

Brand	SMC Networks
Model	raptor
Category	Test Equipment
Language	English