C
HAPTER
4
| Configuring the Switch
Quality of Service
– 181 –
Figure 75: Configuring Port Tag Remarking Mode
CONFIGURING PORT
DSCP TRANSLATION
AND
REWRITING
Use the QoS Port DSCP Configuration page to configure ingress translation
and classification settings and egress re-writing of DSCP values.
PATH
Configuration, QoS, Port DSCP
PARAMETERS
These parameters are displayed:
◆ Port – Port identifier.
◆ Ingress Translate – Enables ingress translation of DSCP values based
on the specified classification method.
To Next Page
Need help?
General
