C
HAPTER
5
| Monitoring the Switch
Displaying Information About Security Settings
– 206 –
DISPLAYING INFORMATION ABOUT SECURITY SETTINGS
You can use the Monitor/Security menu to display statistics on
management traffic, security controls for client access to the data ports,
and the status of remote authentication access servers.
DISPLAYING ACCESS
MANAGEMENT
STATISTICS
Use the Access Management Statistics page to view statistics on traffic
used in managing the switch.
PATH
Monitor, Security, Access Management Statistics
USAGE GUIDELINES
Statistics will only be displayed on this page if access management is
enabled on the Access Management Configuration menu (see page 63),
and traffic matching one of the entries is detected.
PARAMETERS
These parameters are displayed:
◆ Interface – Network protocols used to manage the switch.
(Protocols: HTTP, HTTPS, SNMP, TELNET, SSH)
◆ Receive Packets – The number of management packets received.
◆ Allow Packets – The number of management packets accepted.
◆ Discard Packets – The number of management packets discarded.
WEB INTERFACE
To display the information on management packets, click Monitor, System,
Access Management Statistics.
Figure 94: Access Management Statistics
To Next Page
Loading...
Need help?
General
