C
HAPTER
4
| Configuring the Switch
Configuring Security
– 92 –
matches this entry when ARP/RARP protocol address space setting
is equal to IP (0x800)
■
IPv4 frames (based on destination MAC address, protocol type, TTL,
IP fragment, IP option flag, source/destination IP, VLAN ID, VLAN
priority)
PARAMETERS
These parameters are displayed:
ACCESS CONTROL LIST CONFIGURATION
◆ Ingress Port - Any port, port identifier, or policy.
◆ Frame Type - The type of frame to match.
◆ Action - Shows whether a frame is permitted or denied when it
matches an ACL rule.
◆ Rate Limiter - Shows if rate limiting will be enabled or disabled when
matching frames are found.
◆ Port Copy - Shows the port to which matching frames are copied.
◆ Mirror - Mirrors matching frames from this port. (Default: Disabled)
See "Configuring Port Mirroring" on page 191.
◆ Logging - Shows if logging of matching frames to the system log is
enabled or disabled.
Open the System Log Information menu (page 197) to view any entries
stored in the system log for this entry. Related entries will be displayed
under the “Info” or “All” logging levels.
◆ Shutdown - Shows if a port is shut down when a macthing frame is
found.
◆ Counter - Shows he number of frames which have matched any of the
rules defined for this ACL.
The following buttons are used to edit or move the ACL entry (ACE):
Table 8: QCE Modification Buttons
Button Description
Inserts a new ACE before the current row.
Edits the ACE.
Moves the ACE up the list.
Moves the ACE down the list.
Deletes the ACE.
The lowest plus sign adds a new entry at the bottom of the list.
To Next Page
Loading...
Need help?
General
