SMC Networks SMCGS10C-Smart User Manual

C HAPTER 5 | Monitoring the Switch
Displaying Information About Security Settings
– 211 –
WEB INTERFACE
To display port status for authentication services, click Monitor, Security,
Network, NAS, Switch.
Figure 97: Network Access Server Switch Status
DISPLAYING PORT
STATISTICS FOR
802.1X OR REMOTE
AUTHENTICATION
SERVICE
Use the NAS Statistics Port selection page to display authentication
statistics for the selected port – either for 802.1X protocol or for the
remote authentication server depending on the authentication method.
This page provides detailed NAS statistics for a specific switch port running
EAPOL-based IEEE 802.1X authentication. For MAC-based authenticated
ports, it shows statistics only for the backend server (RADIUS
Authentication Server).
PATH
Monitor, Security, Network, NAS, Port
PARAMETERS
These parameters are displayed:
Port State
◆ Admin State – The port's current administrative state. Refer to NAS
Admin State for a description of possible values (see page 77).
◆ Port State – The current state of the port. Refer to NAS Port State for
a description of the individual states (see page 77).
◆ QoS Class – The QoS class assigned by the RADIUS server. The field is
blank if no QoS class is assigned.
◆ Port VLAN ID – The VLAN in which NAS has placed this port. This field
is blank if the Port VLAN ID is not overridden by NAS.
If the VLAN ID is assigned by the RADIUS server, “(RADIUS-assigned)”
is appended to the VLAN ID. Refer to “RADIUS-Assigned VLAN Enabled”
for a description of this attribute (see page 77).
If the port is moved to the Guest VLAN, “(Guest)” is appended to the
VLAN ID. Refer to “Guest VLAN Enabled” for a description of this
attribute (see page 77).

SMC Networks SMCGS10C-Smart Specifications

General

Brand	SMC Networks
Model	SMCGS10C-Smart
Category	Network Router
Language	English