SMC Networks SMCGS10C-Smart User Manual

C HAPTER 5 | Monitoring the Switch
Displaying Information About Security Settings
– 208 –
■
Limit Reached: The Port Security service is enabled by at least the
Limit Control user module, and that module has indicated that the
limit is reached and no more MAC addresses should be taken in.
■
Shutdown: The Port Security service is enabled by at least the Limit
Control user module, and that module has indicated that the limit is
exceeded. No MAC addresses can be learned on the port until it is
administratively re-opened on the Limit Control configuration Web-
page.
◆ MAC Count – The two columns indicate the number of currently
learned MAC addresses (forwarding as well as blocked) and the
maximum number of MAC addresses that can be learned on the port,
respectively.
If no user modules are enabled on the port, the Current column will
show a dash (-). If the Limit Control user module is not enabled on the
port, the Limit column will show a dash (-).
WEB INTERFACE
To display information about switch-level settings for the Port Security
module, click Monitor, Security, Network, Port Security, Switch.
Figure 95: Port Security Switch Status

SMC Networks SMCGS10C-Smart Specifications

General

Brand	SMC Networks
Model	SMCGS10C-Smart
Category	Network Router
Language	English