EasyManuals Logo
Home>SMC Networks>Network Router>SMCGS10C-Smart

SMC Networks SMCGS10C-Smart User Manual

SMC Networks SMCGS10C-Smart
282 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #228 background imageLoading...
Page #228 background image
C
HAPTER
5
| Monitoring the Switch
Displaying Information on the Spanning Tree
– 228 –
DISPLAYING INFORMATION ON THE SPANNING TREE
Use the monitor pages for Spanning Tree to display information on
spanning tree bridge status, the functional status of participating ports,
and statistics on spanning tree protocol packets.
DISPLAYING BRIDGE
STATUS FOR STA
Use the Bridge Status page to display STA information on the global bridge
(i.e., this switch) and individual ports.
PATH
Monitor, Spanning Tree, Bridge Status
PARAMETERS
These parameters are displayed:
STA Bridges
◆ MSTI – The Bridge Instance. This is also a link to the STP Detailed
Bridge Status.
◆ Bridge ID – A unique identifier for this bridge, consisting of the bridge
priority, and MAC address (where the address is taken from the switch
system).
◆ Root ID – The priority and MAC address of the device in the Spanning
Tree that this switch has been accepted as the root device.
◆ Root Port – The number of the port on this switch that is closest to the
root. This switch communicates with the root device through this port.
If there is no root port, then this switch has been accepted as the root
device of the Spanning Tree network.
◆ Root Cost – The path cost from the root port on this switch to the root
device. For the root bridge this is zero. For all other bridges, it is the
sum of the port path costs on the least cost path to the root bridge.
◆ Topology Flag – The current state of the Topology Change Notification
flag (TCN) for this bridge instance.
◆ Topology Change Last – Time since the Spanning Tree was last
reconfigured.
STP Detailed Bridge Status – Click on a bridge instance under the MSTI
field to display detailed information on the selected entry. The following
additional information is displayed.
◆ Bridge Instance – The Bridge instance - CIST, MST1, ...
◆ Regional Root – The Bridge ID of the currently elected regional root
bridge, inside the MSTP region of this bridge. (This parameter only
applies to the CIST instance.)

Table of Contents

Other manuals for SMC Networks SMCGS10C-Smart

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SMC Networks SMCGS10C-Smart and is the answer not in the manual?

SMC Networks SMCGS10C-Smart Specifications

General IconGeneral
BrandSMC Networks
ModelSMCGS10C-Smart
CategoryNetwork Router
LanguageEnglish

Related product manuals