Sony Alpha SLT-A37 User Manual

114
Adjusting the focus
Direct manual focus
When a lens that is equipped with a direct manual focus function is
mounted and [Autofocus Mode] is set to [Single-shot AF] or [Automatic
AF], you can make fine adjustments using the focusing ring after the focus
is locked. You can quickly focus on a subject rather than using the manual
focus from the beginning. This is convenient in cases such as macro
shooting (DT 18-135mm F3.5-5.6 SAM etc.,).
You can enhance the outline of in-focus ranges with a specific color in
manual focus. This function allows you to confirm the focus easily.
MENU button t 2 t [Peaking Level] t Select the desired
setting
Notes
• Since the camera judges that sharp areas are in focus, the peaking level is different,
depending on the subject, shooting situation, or on the lens used.
• The outline of in-focus ranges is not enhanced when the camera is connected using
an HDMI cable.
To set the color of the peaking function
You can set the color used for the peaking function in manual focus.
MENU button t 2 t [Peaking Color] t Select the desired
setting
Note
• This item cannot be set when [Peaking Level] is set to [Off].
You can check the focus by enlarging the image before shooting.
Peaking
Focus Magnifier
1 MENU button t 3 t [Preview Button] t [Focus
Magnifier]

Sony Alpha SLT-A37 Specifications

General

Product color	Black
Operating temperature (T-T)	0 - 40 °C
PictBridge	No
Flash modes	Red-eye reduction
Flash recharging time	4 s
Auto Focus (AF) lock	Yes
Auto Focus (AF) points	15
Scene modes	Portrait, Sunset, Landscape (scenery)
Field of view	100 %
Display diagonal	6.7 \
Display resolution (numeric)	230400 pixels
Image sensor size (W x H)	23.5 x 15.6 mm
Color temperature	2500 K
Effective megapixels (image)	16.1 MP
Viewfinder type	Electronic

Weight and Dimensions

Depth	84.7 mm
Width	124.4 mm
Height	92 mm