Sony Alpha SLT-A37 User Manual

180
Cleaning (Advanced operations)
Cleaning
Cleaning the camera and a lens
• Do not touch the inside of the camera, such as lens contacts, or the mirror.
Since dust on the mirror or around the mirror may affect the images or the
performance of the camera, blow the dust away using a commercially
available blower*. For details on cleaning the image sensor, see the next
page.
* Do not use a spray blower. Using one may cause a malfunction.
• Clean the camera surface with a soft cloth slightly moistened with water,
then wipe the surface with a dry cloth. Do not use the following as they
may damage the finish or the casing.
– Chemical products such as thinner, benzine, alcohol, disposable cloths,
insect repellent, sunscreen or insecticide, etc.
– Do not touch the camera with the above on your hand.
– Do not leave the camera in contact with rubber or vinyl for a long time.
• Do not use a cleaning solution containing organic solvents, such as
thinner, or benzine.
• When cleaning the lens surface, remove dust using a commercially
available blower. In case of dust that sticks to the surface, wipe it off with
a soft cloth or tissue paper slightly moistened with lens cleaning solution.
Wipe in a spiral pattern from the center to the outside. Do not spray lens
cleaning solution directly onto the lens surface.
Cleaning the camera
Cleaning the lens

Sony Alpha SLT-A37 Specifications

General

Product color	Black
Operating temperature (T-T)	0 - 40 °C
PictBridge	No
Flash modes	Red-eye reduction
Flash recharging time	4 s
Auto Focus (AF) lock	Yes
Auto Focus (AF) points	15
Scene modes	Portrait, Sunset, Landscape (scenery)
Field of view	100 %
Display diagonal	6.7 \
Display resolution (numeric)	230400 pixels
Image sensor size (W x H)	23.5 x 15.6 mm
Color temperature	2500 K
Effective megapixels (image)	16.1 MP
Viewfinder type	Electronic

Weight and Dimensions

Depth	84.7 mm
Width	124.4 mm
Height	92 mm