Sony Alpha SLT-A37 User Manual

77
Preparation (Advanced operations)
Setting up the camera
When attaching the FDA-A1AM Angle Finder (sold separately) to the
camera, remove the eyecup.
Note
• When an FDA-A1AM Angle Finder (sold separately) is attached to the camera,
switch the display between the viewfinder and the LCD screen by pressing the
FINDER/LCD button. Setting [Eye-Start AF] to [Off] is recommended because the
eyepiece sensors located above the viewfinder may be activated.
Removing the eyecup
Carefully slide the eyecup off by
pushing on each side of the eyecup.
• Put your fingers under the eyecup, and
slide it upward.

Sony Alpha SLT-A37 Specifications

General

Product color	Black
Operating temperature (T-T)	0 - 40 °C
PictBridge	No
Flash modes	Red-eye reduction
Flash recharging time	4 s
Auto Focus (AF) lock	Yes
Auto Focus (AF) points	15
Scene modes	Portrait, Sunset, Landscape (scenery)
Field of view	100 %
Display diagonal	6.7 \
Display resolution (numeric)	230400 pixels
Image sensor size (W x H)	23.5 x 15.6 mm
Color temperature	2500 K
Effective megapixels (image)	16.1 MP
Viewfinder type	Electronic

Weight and Dimensions

Depth	84.7 mm
Width	124.4 mm
Height	92 mm