131
Setting the image processing
Shooting (Advanced operations)
Notes
• When the zoom feature of the camera (ZOOM) is used, the [Toy Camera] and
[Miniature] effects are not available.
• When [Partial Color] is selected, images may not retain the selected color,
depending on the subject or shooting condition.
• When the exposure mode is set to Intelligent Auto, Superior Auto, Sweep Panorama,
3D Sweep Panorama or Tele-zoom Continuous Priority AE, or when [Quality] is set
to [RAW] or [RAW & JPEG], Picture Effect cannot be used.
• When [HDR Painting], [Miniature], [Rich-tone Mono.] or [Soft Focus] is selected,
you cannot confirm the effect before shooting. You cannot also set the drive mode.
• When the contrast of the scene is low or when significant camera shake or subject
blur has occurred with [HDR Painting] or [Rich-tone Mono.] selected, you may not
obtain good HDR images. If the camera detects such situation, is indicated on the
recorded image to inform you of this situation. Shoot again, as necessary,
recomposing or paying attention to the blur.
You can select the desired style to be used to perform image processing,
and adjust the contrast, saturation, and sharpness for each Creative Style.
You can also adjust the exposure (shutter speed and aperture), unlike Scene
Selection where the camera adjusts the exposure.
Creative Style
1 Fn button t (Creative Style) t Select the desired setting
2 When you want to adjust (Contrast), (Saturation), or
(Sharpness), select the desired item with b/B on the control
button, then adjust the value with v/V.
(Standard) For shooting various scenes with rich gradation and beautiful
colors.
(Vivid) The saturation and contrast are heightened for shooting
striking images of colorful scenes and subjects such as
flowers, spring greenery, blue sky, or ocean views.
(Portrait) For shooting the skin color in a soft tone, ideally suited to
shooting portraits.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
