Sony Alpha SLT-A37 User Manual

179
Print (Advanced operations)
Print (Advanced operations)
Print
Specifying DPOF
Using the camera, you can specify the still images before you print images
at a shop or with your printer. Follow the procedure below.
DPOF specifications are left with images after printing. It is recommended
that you unspecify them after printing.
Notes
• You cannot specify DPOF on RAW data files.
• You cannot specify the number of images to be printed.
You can date images when printing them. The position of the date (inside
or outside the image, character size, etc.) depends on your printer.
MENU button t 1 t [Specify Printing] t [Date Imprint] t
[On]
Note
• This function may not be provided, depending on the printer.
1 MENU button t 1 t [Specify Printing] t [DPOF Setup]
t [Multiple Img.]
2 Select the image with b/B on the control button.
3 Check the mark by pressing the center of the control button.
• To unspecify DPOF, select the image again, then press the center of the
control button.
4 Press the MENU button.
5 Select [OK] with v, then press the center of the control button.
Date Imprint

Sony Alpha SLT-A37 Specifications

General

Product color	Black
Operating temperature (T-T)	0 - 40 °C
PictBridge	No
Flash modes	Red-eye reduction
Flash recharging time	4 s
Auto Focus (AF) lock	Yes
Auto Focus (AF) points	15
Scene modes	Portrait, Sunset, Landscape (scenery)
Field of view	100 %
Display diagonal	6.7 \
Display resolution (numeric)	230400 pixels
Image sensor size (W x H)	23.5 x 15.6 mm
Color temperature	2500 K
Effective megapixels (image)	16.1 MP
Viewfinder type	Electronic

Weight and Dimensions

Depth	84.7 mm
Width	124.4 mm
Height	92 mm