TV Controls and Indicators
VOLUME
[] Speaker Outputs audio signal.
[] Light Sensor/ Senses room light level and adjusts the screen brightness accordingly. Do not put
(IR) Infrared anything near the sensor or the nearby general area (as shown above), as its function
Receiver may be affected.
Receives IR signals from the remote control. Do not block this area, as it may
interfere with remote control operation.
[] PIC OFF/ Lights up in orange when the Timer or Sleep Timer is set. Lights up and/or blinks
TIMER in orange during a software upgrade.
Lights up in green when the Power Saving is set to Picture Off.
[] HD SIGNAL Lights up when the TV receives HD signal including up converted signals.
[] POWER/ Lights up in red when your TV is in PC power saving mode or during the software
STANDBY upgrade. Lights up in green when the TV is turned on. If the LED blinks in red
continuously, this may indicate that the TV needs servicing (see contacting Sony
information on the front cover).
[] POWER Press to turn on and off the TV.
[] : cHANNEL Dess io scan ih;ough channels: To scan quickiy ihrough channeisl press and hold ....
@ _ down either +/-. In the MENU screen, these buttons serve as up/down buttons.
[] : v6LUME +...........Pressio adjus{ {he {oM_e: i1{{heMENU scree;i:ihesebuiio;is serveasielt/righi buiio;is:
[] -_- Press to display the list of inputs or confirm your selection. Press repeatedly to toggle
INPUT through the inputs.
• Inputs can be changed by pressing 4"1,€,and Q while the list of external inputs is
displayed.
• Refer to page 40 for information about setting up the external inputs labels.
In the MENU screen, this button serves to confirm the selection or setting.
[] HOME Press to display TV Home Menu/XMBTM to access TV Settings and other media
and network related content.
23
t_
"d
To Next Page
Loading...
Need help?
General