Universal
Blu-ray,
HD-DVD, DVD,
DVD-R,
DVD/HDD, Universal Universal Universal
Button Action DVD/VCR VCR, DVR SAT/CBL AMP/Receiver
Cursor up/down V V V
Cursor left/right _/ _/ _/
i :
Digit input V _/ V
Channel
up/dowu V V V
Last channel N/A N/A _/
0-9 _/
CH +/- _/
JUMP N/A
al
AMP/RECEIVER
VOL +1- TV volume +M N/A _ _ Vol.
MUTING Muting N/A N/A N/A _/
N
RED Red _/ N/A _/ DVD or BD Input
GREEN Green _ N/A _/ VIDEO1 or A/VInput
BLUE Blue _/ N/A _/ SAT or Cable Input
YELLOW Yellow _/ N/A _/ TV or Tuner Input
Remote Control Backlight
The remote control backlight can be set to automatically light up when a button is pressed.
To set auto backlight:
Press LIGHT and MUTING simultaneously until tile four FUNCTION buttons blink.
To turn off auto backlight:
Press LIGHT and MUTING simultaneously until tile TV FUNCTION button blinks.
To change the backlight timeout:
1 Press LIGHT, VOL +, and CH + simultaneously until one of tile FUNCTION buttons blinks.
2 Select the FUNCTION button that corresponds to your preferred timeout and press @.
5 seconds (default), press DVD button 10 seconds, press AMP button
15 seconds, press STB button 20 seconds, press TV button
To reset the remote control to the factory default:
Press SCENE, TV POWER, and @ simultaneously. Tile four FUNCTION buttons blink when
successfully reset.
28
To Next Page
Loading...
Need help?
General