Quick Start Guide
10
Inserting the “Memory Stick” (p. 109)
Open the lid of the “Memory Stick” slot. Insert the “Memory Stick” in the “Memory Stick”
slot as far as it can go with the b mark facing down as illustrated, then close the lid.
While the access lamp is lit or flashing
Do not shake or strike your camcorder because your camcorder is reading the data from
the “Memory Stick” or recording the data on the “Memory Stick.” Do not turn the
power off, eject the “Memory Stick” or remove the battery pack. Otherwise, image data
breakdown may occur.
Quick Start Guide – Recording on “Memory Stick”
(DCR-TRV22/TRV33 only)
Connecting the power cord (p. 17)
Use the battery pack when using your camcorder outdoors (p. 16).
Open the DC IN
jack cover.
Connect the plug with its v
mark facing the battery.
AC Adaptor (supplied)
Access lamp
b mark
To eject the “Memory Stick,”
open the lid of the “Memory
Stick” slot, slide MEMORY
EJECT in the direction of the
arrow.
1
2
3
4
Fastening the grip belt
Fasten the grip belt firmly.
How to hold
your camcorder
1
2
3
To Next Page
Loading...
Need help?
General