142
To prevent accidental erasure of important images, you can protect selected images.
The POWER switch should be set to .
Operate by touching the panel.
(1) Press INDEX to display the index screen.
(2) Press - MARK. The screen to protect the image appears.
(3) Press the image you want to protect. The - indicator appears above the
protected image.
To return to FN
Press EXIT.
To cancel image protection
Press the image you want to cancel image protection in step 3 again.
The - indicator disappears from the image.
Note
Formatting erases all information on the “Memory Stick,” including the protected
image data. Check the contents of the “Memory Stick” before formatting.
If the write-protect tab on the “Memory Stick” is set to LOCK
You cannot turn on or off the - indicator.
Preventing accidental erasure
– Image protection
1
INDEX
2,3
-
MARK
123
45
6
EXIT
RET.
T t
MARK
101
2 / 8
To Next Page
Loading...
Need help?
General